Repair Procedures: Installation

[Gasoline 2.0 GDI] 

1. Install in the reverse order of removal.
   NOTE:

   1. Be careful not to damage the O-ring (A). If the O-ring is damaged, replace with a new one.
   2. Smear and cover splines (B) with molybdenum type high pressure grease.

      GREASE SPL-1 or equivalent

      Fig 1: Locating Smear And Cover Splines With Molybdenum Type High Pressure Grease

      Courtesy of HYUNDAI MOTOR AMERICA
   3. Apply grease around the oil seal (C).
      Fig 2: Oil Seal Grease Applying Area

      Courtesy of HYUNDAI MOTOR AMERICA
   4. Install the propeller shaft to be near runout marking (Transfer assembly 1ea, propeller shaft 1ea) each other.
      Fig 3: Propeller Shaft Runout Marking

      Courtesy of HYUNDAI MOTOR AMERICA

[Gasoline 1.6 T-GDI] 

1. Install in the reverse order of removal.
   NOTE:

   1. Be careful not to damage the O-ring (A). If the O-ring is damaged, replace with a new one.
   2. Smear and cover splines (B) with molybdenum type high pressure grease.

      GREASE SPL-1 or equivalent

      Fig 4: Locating O-Ring

      Courtesy of HYUNDAI MOTOR AMERICA
   3. Install the propeller shaft to be near runout marking (Transfer assembly 1ea, propeller shaft 1ea) each other.
      Fig 5: Propeller Shaft Runout Marking

      Courtesy of HYUNDAI MOTOR AMERICA