LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2016 >> Tucson SE, 4WD >> Repair and Diagnosis >> Engine Performance >> Ignition System >> Ignition System - 2.0L >> Ignition Coil >> Repair Procedures >> Removal

Repair Procedures: Removal

  1. Disconnect the battery negative terminal.
  2. Remove the engine cover.
  3. Disconnect the ignition coil connectors (A).
    Fig 1: Locating Ignition Coil Connectors
    G11643475Courtesy of HYUNDAI MOTOR AMERICA
    NOTE:
    • When removing the ignition coil connector, pull the lock pin (A) and push the clip (B).
      Fig 2: Removing Ignition Coil Connector
      G11643476Courtesy of HYUNDAI MOTOR AMERICA
  4. Remove the ignition coil (A).
    Fig 3: Removing Ignition Coil
    G11643477Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals