LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2016 >> Tucson SE, 4WD >> Repair and Diagnosis >> Body & Frame >> Ignition Switch/Steering Lock >> Ignition Switch Assembly >> Ignition Switch >> Repair Procedures >> Inspection

Repair Procedures: Inspection

  1. Disconnect the ignition switch connector (B) and key warning switch connector (A) from the steering column.
    Fig 1: Locating Key Warning Switch Connector
    G11670497Courtesy of HYUNDAI MOTOR AMERICA
    Fig 2: Locating Ignition Switch Connector
    G11670498Courtesy of HYUNDAI MOTOR AMERICA
  2. Check for continuity between the terminals.
  3. If continuity is not specified, replace the switch.
Fig 3: Ignition Switch Connector Terminals Continuity Chart
G11670499Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals