LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2016 >> Tucson Limited, 4WD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - 1.6L >> Canister Close Valve (CCV) >> Repair Procedures >> Removal

Repair Procedures: Removal

  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Lift the vehicle.
  3. Disconnect the canister close valve connector (A).
  4. Disconnect the ventilation hose (B) connected to the fuel tank air filter and canister close valve.
  5. Remove the fuel tank air filter after removing the installation nut (C).
    Fig 1: Disconnecting Canister Close Valve Connector
    G11675747Courtesy of HYUNDAI MOTOR AMERICA
  6. Release the lever (A), and then rotate the canister close valve (B) in the direction of an pointer.
  7. Remove the canister close valve from the fuel tank air filter.
Fig 2: Lever Location
G11675748Courtesy of HYUNDAI MOTOR AMERICA
Fig 3: Canister Close Valve Location
G11675749Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals