LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2016 >> Tucson Eco, FWD >> Repair and Diagnosis >> Transmission >> Transmission Control Systems >> Dual Clutch Transmission Control System - 1.6L >> Input Shaft Speed Sensor >> Repair Procedures >> Removal

Repair Procedures: Removal

  1. Remove the air cleaner assembly and air duct.

    (Proceed to Engine Mechanical System - "AIR CLEANER 1.6L ")

  2. Remove the battery and tray.

    (Proceed to Engine Electrical System - "BATTERY ")

  3. Remove the clutch actuator.

    (Proceed to Dual Clutch Control System - "CLUTCH ACTUATOR ")

  4. Disconnect the input shaft speed sensor (A).
    Fig 1: Disconnecting Input Shaft Speed Sensor
    G11675928Courtesy of HYUNDAI MOTOR AMERICA
    Fig 2: Input Shaft Speed Sensor Bolt Location (A-2ea)
    G11675929Courtesy of HYUNDAI MOTOR AMERICA
  5. Remove the input shaft speed sensor after removing the bolt (A-2ea).
    Fig 3: Input Shaft Speed Sensor 2 Location
    G11675930Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals