LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2016 >> Tucson Eco, FWD >> Repair and Diagnosis >> Engine Performance >> Ignition System >> Ignition System - 1.6L >> Ignition Coil >> Repair Procedures >> Removal

Repair Procedures: Removal

  1. Turn ignition switch OFF and disconnect the negative (-) battery cable.
  2. Remove the engine cover.
  3. Disconnect the ignition coil connector (A).
    Fig 1: Disconnecting Ignition Coil Connector
    G11671049Courtesy of HYUNDAI MOTOR AMERICA
  4. Remove the ignition coil (A).
    Fig 2: Removing Ignition Coil
    G11671050Courtesy of HYUNDAI MOTOR AMERICA
    NOTE:
    • When removing the ignition coil connector, pull the lock pin (A) and push the clip (B).
    Fig 3: Removing Ignition Coil Connector
    G11671051Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals