LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2016 >> Tucson Eco, FWD >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> Fuel Delivery System - 1.6L >> Fuel Pump Control Module (FPCM) >> Repair Procedures >> Removal

Repair Procedures: Removal

  1. Release the residual pressure in fuel line.

    (Proceed to the Fuel Delivery System - Repair Procedures - "Release Residual Pressure in Fuel Line ").

  2. Remove the rear seat.

    (Proceed to Body - "REAR SEAT ASSEMBLY ")

  3. Remove the fuel pump service cover (A).
    Fig 1: Removing Fuel Pump Service Cover
    G11675786Courtesy of HYUNDAI MOTOR AMERICA
  4. Disconnect the fuel pump control module connector (A) and the fuel tank pressure sensor connector (B).
  5. Disconnect the fuel pressure sensor connector (C).
  6. Disconnect the fuel feed tube quick connector (D) and the vapor tube quick-connector (E).
    Fig 2: Disconnecting Fuel Feed Tube Quick Connector And Vapor Tube Quick-Connector
    G11675787Courtesy of HYUNDAI MOTOR AMERICA
  7. Remove the locking ring (A) by using the special service tool [No.: 09310-B8100].
Fig 3: Removing Locking Ring Using Special Service Tool (09310-B8100)
G11675788Courtesy of HYUNDAI MOTOR AMERICA
Fig 4: FPCM Location
G11675789Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals