LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2016 >> Tucson Eco, FWD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - 1.6L >> Electric WGT Control Actuator >> Repair Procedures >> Inspection >> [Position Sensor]

[Position Sensor]

  1. Turn ignition switch OFF.
  2. Connect the GDS to the data link connector (DLC).
  3. Check the output voltage at each position of the EWGA position sensor on current data part within the specification.

    Specification:  Refer to "Specification "

scientia non olet · About LEMON Manuals