LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2016 >> Sonata Plug-In Hybrid Limited >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> Fuel Delivery System (PHEV) >> Fuel Pump Control Module (FPCM) >> Repair Procedures >> Removal

Repair Procedures: Removal

  1. Turn the ignition switch OFF, and then remove battery (-) cable.
  2. Remove the rear seat cushion. (Refer to Body - "Rear Seat Assembly ")
  3. Remove the fuel pump service cover (A).
    Fig 1: Fuel Pump Service Cover Location
    G11631130Courtesy of HYUNDAI MOTOR AMERICA
  4. Disconnect the fuel pump control module connector (A).
  5. Remove the fuel pressure control module (A) after removing the screws.
    Fig 2: Locating Fuel Pressure Control Module
    G11631131Courtesy of HYUNDAI MOTOR AMERICA