LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2016 >> Sonata Plug-In Hybrid Limited >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System (PHEV) >> Heated Oxygen Sensor (HO2S) >> Repair Procedures >> Removal >> [Bank 1/Sensor 2]

[Bank 1/Sensor 2]

  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Disconnect the connector (A), and then remove the sensor (B).
    Fig 1: Sensor Connector Location (Bank 1/Sensor 2)
    G11631028Courtesy of HYUNDAI MOTOR AMERICA
    Fig 2: Heated Oxygen Sensor Location
    G11631029Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals