LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2016 >> Sonata Plug-In Hybrid Limited >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System (PHEV) >> Heated Oxygen Sensor (HO2S) >> Repair Procedures >> Removal >> [Bank 1/Sensor 1]

[Bank 1/Sensor 1]

  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Disconnect the connector (A), and then remove the sensor (B).
NOTE: Note that the SST (Part No.: 09392-1Y100 or 09392-2H100) is useful when removing the heated oxygen sensor.
Fig 1: Removing Heated Oxygen Sensor Using SST
G11631025Courtesy of HYUNDAI MOTOR AMERICA
Fig 2: Sensor Connector Location (Bank 1/Sensor 1)
G11631026Courtesy of HYUNDAI MOTOR AMERICA
Fig 3: Heated Oxygen Sensor Location
G11631027Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals