Driver Power Window Switch

CAUTION:

When removing with a flat-tip screwdriver or remover, wrap protective tape around the tools to prevent damage to components.
When removing the interior trim pieces, use a plastic panel removal tool not to damage the surface.
Be careful to store and handle the trim when removing/installing because lubricant and oil can leave a stain on the trim.

Disconnect the negative (-) battery terminal.
Remove the front door trim. (Refer to Body - "Front Door Trim ")
Remove the power window switch assembly after disengaging the retaining clips.

Fig 1: Locating Power Window Switch Assembly Retaining Clips
Courtesy of HYUNDAI MOTOR AMERICA

Fig 2: Removing Power Window Switch Assembly Retaining Clips
Courtesy of HYUNDAI MOTOR AMERICA

Information
- Replace any damaged clips.
  
  Fig 3: Locating Power Window Switch Assembly Damaged Clips (1 Of 2)
  Courtesy of HYUNDAI MOTOR AMERICA
  
  Fig 4: Locating Power Window Switch Assembly Damaged Clips (2 Of 2)
  Courtesy of HYUNDAI MOTOR AMERICA