LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2016 >> Sonata Hybrid >> Repair and Diagnosis >> Transmission >> Transmission Control Systems >> Automatic Transaxle Control System (HEV) >> Shift Cable >> Repair Procedures >> Removal

Repair Procedures: Removal

  1. Air cleaner assembly and air duct.

    (Refer to "AIR CLEANER ")

  2. Battery and battery tray.

    (Refer to "AUXILIARY 12V BATTERY ")

  3. Remove the nut (A) from the manual control lever.
  4. Remove the shift cable (B) from the bracket (C) at transaxle side.
    Fig 1: Locating Shift Cable, Bracket And Nut
    G12061234Courtesy of HYUNDAI MOTOR AMERICA
  5. Remove the floor console assembly.

    (Refer to "FLOOR CONSOLE ")

  6. Remove the air duct (A).
    Fig 2: Locating Air Duct
    G12061235Courtesy of HYUNDAI MOTOR AMERICA
  7. Disconnect the shift cable (A).
    1. Disconnect the cable bracket from the shift lever after pushing the lock.
    2. Disconnect the cable holer (A) from the shift lever.
    Fig 3: Disconnecting Cable Bracket From Shift Lever
    G12061236Courtesy of HYUNDAI MOTOR AMERICA
  8. Remove the airbag module.

    (Refer to "AIRBAG MODULE ")

  9. Disconnect the shift cable retainer (B) after removing the mounting nut (A).
  10. Remove the shift cable by pulling it toward the interior.
Fig 4: Locating Shift Cable Retainer And Mounting Nut
G12061237Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals