LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2016 >> Sonata Hybrid >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System (HEV) >> Crankshaft Position Sensor (CKPS) >> Repair Procedures >> Removal

Repair Procedures: Removal

  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Disconnect the crankshaft position sensor connector (A) and remove the sensor (B) after removing the installation bolt.
Fig 1: Disconnecting Crankshaft Position Sensor Connector
G12060798Courtesy of HYUNDAI MOTOR AMERICA
Fig 2: Removing Crankshaft Position Sensor
G12060799Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals