Repair Procedures: Removal

Disconnect a boots from the console upper cover.
Pull the knob (A) in the direction of "F" and remove the knob.

Fig 1: Removing Knob
Courtesy of HYUNDAI MOTOR AMERICA
Remove the floor console assembly.
(Refer to: Body - "FLOOR CONSOLE ").
Remove the air duct (A).

Fig 2: Identifying Air Duct
Courtesy of HYUNDAI MOTOR AMERICA
Disconnect the connector (A) from the shift lever.

Fig 3: Identifying Shift Lever Connector
Courtesy of HYUNDAI MOTOR AMERICA
Disconnect the control cable (A).
1. Disconnect the cable holder (A) from the shift lever.
2. Disconnect the cable bracket from the shift lever after pushing the lock.
Fig 4: Disconnecting Control Cable & Holder
Courtesy of HYUNDAI MOTOR AMERICA
Remove the bolts and then shift lever assembly (A).
Tightening Torque:

8.8 ~ 13.7 N.m (0.9 ~ 1.4 kgf.m, 6.5 ~ 10.1 lb-ft)

Fig 5: Removing Shift Lever Assembly
Courtesy of HYUNDAI MOTOR AMERICA
Remove the 'P' position switch mounting bracket (A).

Fig 6: Identifying P Position Switch Mounting Bracket
Courtesy of HYUNDAI MOTOR AMERICA
Disconnect the 'P' position switch (A) and shift lock solenoid (B).

Fig 7: Identifying P Position Switch And Shift Lock Solenoid
Courtesy of HYUNDAI MOTOR AMERICA
Disconnect the manual mode switch housing (A).

Fig 8: Identifying Manual Mode Switch Housing
Courtesy of HYUNDAI MOTOR AMERICA
Disconnect the main connector (A) from the shift lever.

Fig 9: Identifying Main Connector
Courtesy of HYUNDAI MOTOR AMERICA
P position switch, shift lock solenoid, manual mode switch housing, main connector assembly (A).

Fig 10: 'P' Position Switch, Shift Lock Solenoid, Manual Mode Switch Housing And Main Connector Assembly
Courtesy of HYUNDAI MOTOR AMERICA
Remove the mounting bracket (A) of terminals from the main connector.

Fig 11: Removing Mounting Bracket Of Terminals
Courtesy of HYUNDAI MOTOR AMERICA
Remove each terminals (F) of the P position switch (A), shift lock solenoid (B), manual mode switch housing (C) after released lock (E) from the main connector (D).
CAUTION:
- Record the location of the wiring colors before disconnecting the terminals.
Fig 12: Removing Terminals And Released Lock
Courtesy of HYUNDAI MOTOR AMERICA

Fig 13: Identifying P Position Switch, Shift Lock Solenoid, Manual Mode Switch Housing And Main Connector
Courtesy of HYUNDAI MOTOR AMERICA
NOTE:
Connector information

Fig 14: Identifying Switch Connector Terminals
Courtesy of HYUNDAI MOTOR AMERICA
1. 3. Shift lock solenoid (-)
2. 4. Shift lock solenoid (+)
3. 5. Sport mode switch signal (-)
4. 6. Sports mode down switch
5. 7. Sports mode select switch
6. 8. Sports mode up switch
7. 9. P (Parking) position switch (-)
8. 10. P (Parking) position switch (+)