LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2016 >> Sonata Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 46 (Front Axle Assembly (HEV)) >> Front Hub Knuckle >> Repair Procedures >> Reassembly

Repair Procedures: Reassembly

WARNING: This page is about a different car, the 2015 Hyundai Sonata. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the hub bearing to the knuckle assembly.
    1. Lay the knuckle assembly (A) on press.
    2. Lay a new hub bearing upon the knuckle assembly (A).
    3. Lay a suitable adapter (B) upon the hub bearing.
    4. Install the hub bearing to the knuckle assembly by using press.
    Fig 1: Installing Hub Bearing To Knuckle Assembly
    G10588909Courtesy of HYUNDAI MOTOR AMERICA
    CAUTION:
    • Do not press against the inner race of the hub bearing because that can cause damage to the bearing assembly.
    • Always use a new wheel bearing assembly.
  2. Install the hub assembly to the knuckle assembly.
    1. Lay the hub assembly (A) upon a suitable adapter.
    2. Lay the knuckle assembly (B) upon the hub assembly (A).
    3. Lay a suitable adapter (C) upon the hub bearing.
    4. Install the hub assembly (A) to the knuckle assembly (B) by using press.
    Fig 2: Identifying Hub Assembly
    G10588910Courtesy of HYUNDAI MOTOR AMERICA
    CAUTION: Do not press against the inner race of the hub bearing because that can cause damage to the bearing assembly.
  3. Install the snap ring (A).
Fig 3: Identifying Snap Ring
G10588911Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals