LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2016 >> Sonata Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 143 (Clutch System) >> Ignition Lock Switch >> Repair Procedures >> Removal

Repair Procedures: Removal

WARNING: This page is about a different car, the 2016 Hyundai Elantra GT and 2015 Hyundai Elantra GT. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn ignition switch OFF and disconnect the negative (-) battery cable.
  2. Disconnect ignition lock switch connector (A).
    Fig 1: Identifying Ignition Lock Switch Connector
    G10750039Courtesy of HYUNDAI MOTOR AMERICA
  3. Remove the ignition lock switch by loosening a nut (A).
    Fig 2: Identifying Ignition Lock Switch Nut
    G10750040Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals