Repair Procedures: Installation
WARNING: This page is about a different car, the 2016 Hyundai Elantra GT and 2015 Hyundai Elantra GT. However, it is still accessible from the selected car via links, so may be relevant.
- Installation is the reverse of removal.
- Adjust the clutch switch.
- Adjust the gab by rotating the adjust nut (A) to satisfy the standard gap range.
Standard Gap Range:
0.5 ~ 1.0 mm (0.0197 ~ 0.0394 in.)
- Tighten the nut (B) with the specified torque.
Tightening Torque:
7.8 ~ 9.8 N (0.8 ~ 1.0 kgf.m, 5.8 ~ 7.2 lb-ft)
- Adjust the gab by rotating the adjust nut (A) to satisfy the standard gap range.