Repair Procedures: Replacement

WARNING: This page is about a different car, the 2016 Hyundai Elantra GT and 2015 Hyundai Elantra GT. However, it is still accessible from the selected car via links, so may be relevant.

Loosen the wheel nuts slightly.
Raise the vehicle, and make sure it is securely supported.
Remove the front wheel and tire (A) from front hub.
Tightening Torque:

88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft)

Fig 1: Identifying Front Wheel
Courtesy of HYUNDAI MOTOR AMERICA
CAUTION:
- Be careful not to damage to the hub bolts when removing the rear wheel and tire (A).
Loosen the nut and then remove the lower arm (A).
Tightening Torque:

78.5 ~ 88.3N.m (8.0 ~ 9.0kgf.m, 57.9 ~ 65.1lb-ft)

Fig 2: Removing Lower Arm
Courtesy of HYUNDAI MOTOR AMERICA
Loosen the bolts and nuts and then remove the front lower arm (A).
Tightening Torque

98.1 ~ 117.7N.m (10.0 ~ 12.0kgf.m, 72.3 ~ 86.8lb-ft)

Fig 3: Removing Front Lower Arm
Courtesy of HYUNDAI MOTOR AMERICA

Tightening Torque

156.9 ~ 176.5N.m (16.0 ~ 18.0kgf.m, 115.7 ~ 130.2lb-ft)

Fig 4: Removing Front Lower Arm
Courtesy of HYUNDAI MOTOR AMERICA
Installation is the reverse of removal.