Repair Procedures: Replacement

WARNING: This page is about a different car, the 2016 Hyundai Elantra GT and 2015 Hyundai Elantra GT. However, it is still accessible from the selected car via links, so may be relevant.

CAUTION:

When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
Put on gloves to protect your hands.

After loosening the mounting screws, then remove the tail gate trim (A).

Fig 1: Loosening Tail Gate Trim Mounting Screws
Courtesy of HYUNDAI MOTOR AMERICA
Using a screwdriver or remover, remove the tail gate upper trim (A)

Fig 2: Identifying Tail Gate Upper Trim
Courtesy of HYUNDAI MOTOR AMERICA
After loosening the mounting screws, then remove the tail gate side trim (A).

Fig 3: Loosening Tail Gate Side Trim Mounting Screws
Courtesy of HYUNDAI MOTOR AMERICA
Install in the reverse order of removal.
Information
- Replace any damaged clips.