Repair Procedures: Removal

WARNING: This page is about a different car, the 2016 Hyundai Elantra GT and 2015 Hyundai Elantra GT. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect the negative (-) battery terminal.
Remove the steering wheel.
(Refer to "STEERING WHEEL ")
Remove the steering column shroud lower/upper panel.
(Refer to "STEERING COLUMN SHROUD PANEL ")
Remove the clock spring.
(Refer to "DRIVER AIRBAG (DAB) MODULE AND CLOCK SPRING ")
Disconnect the lighting switch connector (A) and wiper & washer switch connector (B).

Fig 1: Identifying Lighting Switch Connector
Courtesy of HYUNDAI MOTOR AMERICA

Fig 2: Identifying Wiper And Washer Switch Connector
Courtesy of HYUNDAI MOTOR AMERICA
If it is necessary to remove. The wiper & washer switch (A) only, release the lock of wiper switch using tool without removing the steering wheel and the clock spring.

Fig 3: Releasing Lock Of Wiper Switch Using Tool
Courtesy of HYUNDAI MOTOR AMERICA
Remove the multifunction switch assembly (A) after loosening 2 screws.

Fig 4: Loosening Multifunction Switch Assembly Screws
Courtesy of HYUNDAI MOTOR AMERICA