Repair Procedures: Removal

WARNING: This page is about a different car, the 2016 Hyundai Elantra GT and 2015 Hyundai Elantra GT. However, it is still accessible from the selected car via links, so may be relevant.

[SULEV]

Turn the ignition switch OFF and disconnect the battery negative (-) cable.
Disconnect the connector (A), and then remove the sensor (B).
NOTE: Note that the SST (Part No.: 09392-1Y100 or 09392-2H100) is useful when removing the heated oxygen sensor.

[Bank 1/Sensor 1]

Fig 1: Identifying Connector
Courtesy of HYUNDAI MOTOR AMERICA

Fig 2: Identifying Sensor
Courtesy of HYUNDAI MOTOR AMERICA

[Bank 1/Sensor 2]

Fig 3: Identifying Connector
Courtesy of HYUNDAI MOTOR AMERICA

Fig 4: Identifying Sensor
Courtesy of HYUNDAI MOTOR AMERICA

[LEV2]

[Bank 1/Sensor 1]

Turn the ignition switch OFF and disconnect the battery negative (-) cable.
Disconnect the connector (A), and then remove the sensor (B).
NOTE: Note that the SST (Part No.: 09392-1Y100 or 09392-2H100) is useful when removing the heated oxygen sensor.

Fig 5: Identifying Connector
Courtesy of HYUNDAI MOTOR AMERICA

Fig 6: Identifying Sensor
Courtesy of HYUNDAI MOTOR AMERICA

[Bank 1/Sensor 2]

Turn the ignition switch OFF and disconnect the battery negative (-) cable.
Remove the console side cover (A).

Fig 7: Identifying Console Side Cover
Courtesy of HYUNDAI MOTOR AMERICA
Disconnect the connector (A), and then remove the sensor (B).
NOTE: Note that the SST (Part No.: 09392-1Y100 or 09392-2H100) is useful when removing the heated oxygen sensor.

Fig 8: Identifying Connector
Courtesy of HYUNDAI MOTOR AMERICA

Fig 9: Identifying Sensor
Courtesy of HYUNDAI MOTOR AMERICA