LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2016 >> Sonata Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 121 (Engine Control System) >> Crankshaft Position Sensor (CKPS) >> Repair Procedures >> Removal

Repair Procedures: Removal

WARNING: This page is about a different car, the 2016 Hyundai Elantra GT and 2015 Hyundai Elantra GT. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Disconnect the crankshaft position sensor connector (A) and remove the sensor (B) after removing the installation bolt.
Fig 1: Identifying Crankshaft Position Sensor Connector
G10749870Courtesy of HYUNDAI MOTOR AMERICA
Fig 2: Identifying Crankshaft Position Sensor Bolt
G10749871Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals