LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2016 >> Sonata Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 121 (Engine Control System) >> Canister Close Valve (CCV) >> Repair Procedures >> Removal

Repair Procedures: Removal

WARNING: This page is about a different car, the 2016 Hyundai Elantra GT and 2015 Hyundai Elantra GT. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Lift the vehicle.
  3. Disconnect the canister close valve connector (A).
  4. Disconnect the ventilation hose (B).
  5. Remove the fuel tank air filter after removing the mounting bolts (C).
    Fig 1: Identifying Canister Close Valve Connector And Ventilation Hose
    G10749951Courtesy of HYUNDAI MOTOR AMERICA
  6. Release the lever (A), and then separate the canister close valve (B) from the fuel tank air filter after rotating it in the direction of the pointer in the figure.
Fig 2: Identifying Lever
G10749952Courtesy of HYUNDAI MOTOR AMERICA
Fig 3: Removing Canister Close Valve
G10749953Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals