LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2016 >> Sonata Base >> Repair and Diagnosis >> Body & Frame >> Ignition Switch/Steering Lock >> Ignition Switch Assembly (Except HEV) >> Repair procedures >> Replacement

Repair procedures: Replacement

  1. Disconnect the negative (-) battery terminal.
  2. Remove the crash pad lower panel.

    (Refer to Body - "CRASH PAD ")

  3. Remove the steering column upper & Lower shroud.
  4. Remove the ignition switch (A) and disconnecting the Key Warning/immobilizer connector.
    Fig 1: Identifying Ignition Switch And Lock Pin
    G10568147Courtesy of HYUNDAI MOTOR AMERICA
  5. If it is necessary to remove the key lock cylinder (A), remove the key lock cylinder (A) after pushing lock pin (B) with key ACC.
    Fig 2: Identifying Ignition Switch Lock Cylinder
    G10568148Courtesy of HYUNDAI MOTOR AMERICA
  6. Installation is the reverse of removal procedure.
scientia non olet · About LEMON Manuals