LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2016 >> Santa Fe XL Base >> Repair and Diagnosis >> Engine Performance >> Tune-Up >> Ignition System >> Ignition Coil >> Repair procedures >> Removal

Repair procedures: Removal

  1. Disconnect the battery negative terminal.
  2. Remove the engine cover.
  3. Disconnect the ignition coil connector (A).
    Fig 1: Ignition Coil Connectors
    G10574696Courtesy of HYUNDAI MOTOR AMERICA
    NOTE:
    • When removing the ignition coil connector, pull the lock pin (A) and push the clip (B).
    Fig 2: Ignition Coil Connector Lock Pin And Clip
    G10574697Courtesy of HYUNDAI MOTOR AMERICA
  4. Remove the ignition coil (A).
    Fig 3: Ignition Coils
    G10574698Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals