LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2016 >> Santa Fe Sport Base, FWD >> Repair and Diagnosis >> Electrical >> Charging Systems >> Charging System >> Alternator >> Repair Procedures >> Removal

Repair Procedures: Removal

  1. Disconnect the battery negative terminal.
  2. Disconnect the Air Compressor Connector (A) and the Alternator Connector (B) and remove the Cable from Alternator "B" Terminal (C).
    Fig 1: Air Compressor And Alternator Connectors With Cable
    G10582586Courtesy of HYUNDAI MOTOR AMERICA
  3. Remove the Drive Belt (A) after turning the Drive Belt Tensioner (B) counter clockwise.
    Fig 2: Drive Belt And Drive Belt Tensioner
    G10582587Courtesy of HYUNDAI MOTOR AMERICA
  4. Full out the Through Bolt and then remove the Alternator (A).
    Fig 3: Alternator Through Bolt
    G10582588Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals