Repair procedures: Removal

Disconnect the negative (-) battery terminal.
Remove the crash pad lower panel.
(Refer to Body - "CRASH PAD LOWER PANEL ")
Remove the steering column upper and lower shrouds.
(Refer to Body - "STEERING COLUMN SHROUD PANEL ")
Remove the ignition switch (A) after disconnecting the 6P connector (B).

Fig 1: Identifying Ignition Switch Connector
Courtesy of HYUNDAI MOTOR AMERICA
Remove the key warning and immobilizer connector (A).

Fig 2: Identifying Immobilizer Connector
Courtesy of HYUNDAI MOTOR AMERICA
If it is necessary to remove the key lock cylinder (A), remove the key lock cylinder with key ACC.

Fig 3: Identifying Key Lock Cylinder

Courtesy of HYUNDAI MOTOR AMERICA