Repair procedures: Inspection

Disconnect the ignition switch connector (B) and key warning switch connector (A) from under the steering column.

Fig 1: Identifying Ignition Switch Assembly Connector Terminals (1 Of 2)
Courtesy of HYUNDAI MOTOR AMERICA

Fig 2: Identifying Ignition Switch Assembly Connector Terminals (2 Of 2)
Courtesy of HYUNDAI MOTOR AMERICA
Check for continuity between the terminals.
If continuity is not specified, replace the switch.

Fig 3: Ignition Switch Position Continuity Chart

G10585037

Courtesy of HYUNDAI MOTOR AMERICA