LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2016 >> Santa Fe Sport Base, AWD >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> Fuel Delivery System >> Fuel Pump >> Repair Procedures >> Removal

Repair Procedures: Removal

  1. Release the Residual Pressure in Fuel Line.

    (Refer to: Fuel Delivery System - "RELEASE RESIDUAL PRESSURE IN FUEL LINE ").

  2. Remove the Rear Seat.

    (Refer to: Body - "REAR SEAT ASSEMBLY ").

  3. Remove the fuel pump service cover (A).
    Fig 1: Fuel Pump Service Cover
    G10582864Courtesy of HYUNDAI MOTOR AMERICA
  4. Disconnect the fuel pump connector (A) and the fuel tank pressure sensor connector (B).
  5. Disconnect the fuel feed tube quick connector (C) and the vapor tube quick-connector (D).
    Fig 2: Fuel Pump Connector And Fuel Tank Pressure Sensor Connector
    G10582865Courtesy of HYUNDAI MOTOR AMERICA
  6. Remove locking ring (A) by using the special service tool.
    Fig 3: Removing Locking Ring
    G10582866Courtesy of HYUNDAI MOTOR AMERICA
  7. Disconnect the vapor tube quck-connector (A) at the fuel pump, and then remove the fuel pump from the fuel tank.
    NOTE: Fuel shouldn't be come inside the vapor tube quick-connector while disconnecting the vapor tube quick-connector.
    Fig 4: Vapor Tube Quick-Connector
    G10582867Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals