Repair procedures: Adjustment

How To Adjust Shift Cable 

1. Set room side Shift lever and T/M side manual control lever to N position.
2. Insert the shift cable to the bracket and hold it with a new clip.
3. Push cable to "F" direction, shown in illustration below, to eliminate FREE PLAY.
4. Firmly hold the special bolt with a spanner and tighten the nut with the specified torque.

   Tightening torque: 

   13.7 ~ 17.7 N.m (1.4 ~ 1.8 kgf.m, 10.1 ~ 13.0 lb-ft)

   Fig 1: Pushing Cable In F Direction

   Courtesy of HYUNDAI MOTOR AMERICA