LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2016 >> Genesis Coupe 3.8, Automatic Trans >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transaxle Control System >> Line Pressure Control Solenoid Vale >> Repair procedures >> Inspection

Repair procedures: Inspection

  1. Turn ignition switch OFF.
  2. Disconnect the E Module connector.
  3. Measure resistance between valve signal terminal and valve ground terminal.
  4. Check that the resistance is within the specification.
scientia non olet · About LEMON Manuals