Repair procedures: Removal

WARNING: This page is about a different car, the 2016 Hyundai Genesis and 2015 Hyundai Genesis. However, it is still accessible from the selected car via links, so may be relevant.

Turn ignition switch OFF and disconnect the negative (-) battery cable.
Remove the cover (A).

Fig 1: Cover
Courtesy of HYUNDAI MOTOR AMERICA
Disconnect the ECM connector (A), TCM connector (B) and IDB connector (C).

Fig 2: ECM, TCM And IDB Connectors
Courtesy of HYUNDAI MOTOR AMERICA

Fig 3: ECM Connector
Courtesy of HYUNDAI MOTOR AMERICA
Remove the TCM & ECM & IDB after removing the bolts (A) and nut (B).
Tightening torque:

9.8 ~ 11.8 N.m (1.0 ~ 1.2 kgf.m, 7.2 ~ 8.7 lb-ft)

Fig 4: ECM And TCM Bolts And Nut
Courtesy of HYUNDAI MOTOR AMERICA
Remove the TCM (B) after removing the nuts (A).

Fig 5: TCM And Mounting Nuts
Courtesy of HYUNDAI MOTOR AMERICA