Repair procedures: Removal

Unzip the leather cover of shift lever.
Remove the muffler assembly.
(Refer to MUFFLER )
Remove the heat shield cover (A).

Fig 1: Heat Shield Cover
Courtesy of HYUNDAI MOTOR AMERICA
Disassemble the propeller shaft from the transmission by removing the bolts (A-3ea).

Fig 2: Propeller Shaft Bolts
Courtesy of HYUNDAI MOTOR AMERICA
Remove the base bracket (C) and select rod (D) from the transmission by removing the clips (A-2ea) and snap pin (B).

Fig 3: Base Bracket, Select, Clips And Snap Pin
Courtesy of HYUNDAI MOTOR AMERICA

Fig 4: Clip
Courtesy of HYUNDAI MOTOR AMERICA
Remove the mounting nuts (A-4ea) of shift lever assembly.

Fig 5: Shift Lever Assembly And Mounting Nuts
Courtesy of HYUNDAI MOTOR AMERICA
Pull out the shift lever assembly with the base bracket and select rod.
CAUTION: Be careful not to damage to the shift lever assembly.