Repair procedures: Removal

Disconnect the battery negative terminal.
Remove the engine cover.
Remove the LH/RH engine wiring protector (A).

Fig 1: LH Engine Wiring Protector
Courtesy of HYUNDAI MOTOR AMERICA

Fig 2: RH Engine Wiring Protector
Courtesy of HYUNDAI MOTOR AMERICA
Disconnect the LH/RH ignition coil connectors (A).

Fig 3: LH Ignition Coil Connectors
Courtesy of HYUNDAI MOTOR AMERICA

Fig 4: Identifying RH Ignition Coil Connectors
Courtesy of HYUNDAI MOTOR AMERICA
Remove the LH/RH ignition coil (A).

Fig 5: LH Ignition Coil
Courtesy of HYUNDAI MOTOR AMERICA

Fig 6: RH Ignition Coil
Courtesy of HYUNDAI MOTOR AMERICA
NOTE:
- When removing the ignition coil connector, pull the lock pin (A) and push the clip (B).
  
  Fig 7: Pulling Lock Pin
  Courtesy of HYUNDAI MOTOR AMERICA