Repair procedures: Removal: 2WD
- Turn ignition switch OFF and disconnect the negative (-) battery cable.
- Remove the front wheel and tire (A) from the front hub.
Tightening torque:
88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft)
- Remove the wheel speed sensor bracket bolt & wheel speed sensor connector (A).
Tightening torque:
6.9 ~ 10.8 N.m (0.7 ~ 1.1 kgf.m, 5.1 ~ 8.0 lb-ft)
- Install in the reverse order of removal.