LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2016 >> Genesis 3.8, AWD >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission Control System >> Inhibitor Switch >> Repair procedures >> Removal 3.8L

Removal 3.8L

  1. Turn ignition switch OFF and disconnect the negative (-) battery cable.
  2. Disconnect the inhibitor connector (A) and then remove the shift cable by removing the nut (B).
    Fig 1: Inhibitor Connector
    G10452513Courtesy of HYUNDAI MOTOR AMERICA
  3. Remove the manual control lever (B) after removing the nut (A).
  4. Remove the inhibitor switch assembly after removing the bolts (C).
Fig 2: Manual Control Lever
G10452514Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals