Repair procedures: Removal: Notes

NOTE:

Before replacing the relevant parts, use GDS equipment to fully discharge the air from the relevant parts. (Refer to "AIR INJECTION PROCEDURE ")
Be careful when handling the rear air spring, as the lack of structural reinforcement inside the bellows makes it susceptible to bending or stretching if subjected to external forces.
When removing an air strut, remove the air connector before proceeding with any other work.
Make sure that the orientation of the upper and lower part does not twist during assembly.
Check the cleanliness of each part after it is moved. (check for any foreign substances).
Ensure that the air injection connector includes a cap that prevents the introduction of foreign substances.