Air Spring

Remove the rear wheel & tire.
Tightening torque:

90.0 ~ 110.0 N.m(9.0 ~ 11.0 kgf.m, 65.0 ~ 80.0 lb-ft)
Remove the air tube (A).

Fig 1: Air Tube
Courtesy of HYUNDAI MOTOR AMERICA

NOTE: Take car due to the high pressure air in the spring is discharged.
Remove the stabilizer link (A) & height sensor (B).

Fig 2: Stabilizer Link
Courtesy of HYUNDAI MOTOR AMERICA

Fig 3: Height Sensor
Courtesy of HYUNDAI MOTOR AMERICA
Loosen the cam bolt (A).

Fig 4: Loosening Cam Bolt
Courtesy of HYUNDAI MOTOR AMERICA
Installation is the reverse of removal.
NOTE:
- Take care not to twist upper and lower.
- After transportation, check the cleanliness.
- Check the cap which prevents entering foreign materials on the connector of air filling portion.
- Take care due to it being bent or defamed easily by external force.