Repair procedures: Disassembly

Compress the coil spring with a strut spring compressor. Do not compress the spring more than necessary.
Disconnect the cover (A) remove the lock nut (B).
Tightening torque:

24.5 ~ 29.4 N.m (2.5 ~ 3.0 kgf.m, 14.5 ~ 18.1 lb-ft)

Fig 1: Cover And Lock Nut
Courtesy of HYUNDAI MOTOR AMERICA
Gradually turn the bolt on the spring compressor to slowly release the tension from the spring. Then, disconnect the components.
Reassembly is the reverse of the disassembly.
NOTE:
- Do not reuse the self locking nut.
- Set the hook with bilateral symmetry and the press the coil spring.
  
  Fig 2: Releasing Tension From Spring
  Courtesy of HYUNDAI MOTOR AMERICA
- The centerline of shock absorber is not aligned with coil spring, push the shock absorber to align the centerline.

Fig 3: Pushing Shock Absorber

Courtesy of HYUNDAI MOTOR AMERICA