LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2016 >> Equus Signature >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> Fuel Delivery System >> Fuel Pressure Sensor (FPS) >> Repair procedures >> Removal

Repair procedures: Removal

  1. Turn ignition switch OFF and disconnect the negative (-) battery cable.
  2. Folding the rear seat cushion.
  3. Remove the fuel pump service cover (A) after loosening the screws.
    Fig 1: Fuel Pump Service Cover
    G10382767Courtesy of HYUNDAI MOTOR AMERICA
  4. Disconnect the fuel pressure sensor connector (A).
  5. Remove the fuel pressure sensor fixing pin (B) in the direction of the arrow.
  6. Remove the fuel pressure sensor (C) from the fuel pump.
Fig 2: Fuel Pressure Sensor Connector, Fuel Pressure Sensor Fixing Pin And Fuel Pressure Sensor
G10382768Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals