LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2016 >> Equus Signature >> Repair and Diagnosis >> Engine Mechanical >> Lubrication System >> Oil Pressure Switch >> Repair procedures >> Inspection

Repair procedures: Inspection

  1. Check the continuity between the terminal and the body with an ohmmeter.

    If there is no continuity, replace the oil pressure switch.

    Fig 1: Checking Continuity Between Terminal And Body With Ohmmeter
    G10382396Courtesy of HYUNDAI MOTOR AMERICA
  2. Check the continuity between the terminal and the body when the fine wire is pushed. If there is continuity even when the fine wire is pushed, replace the switch.
    Fig 2: Checking Continuity Between Terminal And Body
    G10382397Courtesy of HYUNDAI MOTOR AMERICA
  3. If there is no continuity when a 49.0kPa (0.5kg/cm2 , 7.1psi) is applied through the oil hole, the switch is operating properly. Check for air leakage. If air leaks, the diaphragm is broken. Replace it.
scientia non olet · About LEMON Manuals