LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2016 >> Equus Signature >> Repair and Diagnosis >> Electrical >> Body Electrical >> Body Electrical System - General Information >> General Information >> General Troubleshooting Information >> Testing And Repairs

Testing And Repairs

  1. Do not use wires or harnesses with broken insulation.

    Replace them or repair them by wrapping the break with electrical tape.

  2. After installing parts, make sure that no wires are pinched under them.
  3. When using electrical test equipment, follow the manufacturer's instructions and those described in this information.
  4. If possible, insert the remover tool from the wire side (except waterproof connector).
    Fig 1: Inserting Remover Tool From Wire Side (Except Waterproof Connector)
    G10386840Courtesy of HYUNDAI MOTOR AMERICA
  5. Use a probe with a tapered tip.

    Refer to the user's guide in the wiring repair kit (Pub No.: TRK 015.)

Fig 2: Probe With Tapered Tip
G10386841Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals