LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2016 >> Equus Signature >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Communication Devices >> Body Control Module (BCM) >> Body Control Module (BCM) >> Repair procedures >> Removal

Repair procedures: Removal

  1. Disconnect the negative (-) battery terminal.
  2. Remove the crash pad lower panel after loosening the mounting screws.

    (Refer to "CRASH PAD LOWER PANEL ")

  3. Disconnect the connector, bolt and nuts from smart key unit, BCM and tilt & telescopic unit.
    Fig 1: Smart Key Unit Nut
    G10387049Courtesy of HYUNDAI MOTOR AMERICA
    Fig 2: BCM And Tilt & Telescopic Unit Bolts
    G10387050Courtesy of HYUNDAI MOTOR AMERICA
  4. Remove the smart key (A) and BCM unit (B) after loosening bolt and nuts.
Fig 3: Smart Key And BCM Unit
G10387051Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals