LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2016 >> Elantra Value Edition >> Repair and Diagnosis >> Transmission >> Transmission Control Systems >> Automatic Transaxle Control System - A6GF1 >> Transaxle Oil Temperature Sensor >> Repair procedures >> Removal

Repair procedures: Removal

  1. Remove the battery and the battery tray.

    (Refer to "CHARGING SYSTEM ")

  2. Remove the under cover (A).

    Tightening torque: 

    6.9 ~ 10.8 N.m (0.7 ~ 1.1 kgf.m, 5.1 ~ 8.0 lb-ft))

    Fig 1: Under Cover
    G10538005Courtesy of HYUNDAI MOTOR AMERICA
  3. Remove the air cleaner assembly and air duct.

    (Refer to Procedures found in "ENGINE AND TRANSAXLE ASSEMBLY ")

  4. Remove the battery and battery tray.

    (Refer to "BATTERY ")

  5. Remove the under cover.

    (Refer to Procedures found in "ENGINE AND TRANSAXLE ASSEMBLY ")

  6. Remove the valve body.

    (Refer to "VALVE BODY ")

  7. Disconnect the solenoid valve connector (A).
    Fig 2: Solenoid Valve Connector
    G10538006Courtesy of HYUNDAI MOTOR AMERICA
  8. Remove the solenoid valve main connector mounting clip (A) after removing the bolt.
    Fig 3: Solenoid Valve Main Connector Mounting Clip
    G10538007Courtesy of HYUNDAI MOTOR AMERICA
  9. Remove the solenoid valve main connector (A).
    Fig 4: Solenoid Valve Main Connector
    G10538008Courtesy of HYUNDAI MOTOR AMERICA
  10. Disconnect the input & output speed sensor connector (A) after press the lock from the solenoid valve main wiring.
    Fig 5: Pressing Lock From Solenoid Valve Main Wiring
    G10538009Courtesy of HYUNDAI MOTOR AMERICA
  11. Remove the solenoid valve main wiring & oil temperature sensor after loosening the main connector bolt (A).
    Fig 6: Loosening Main Connector Bolt
    G10538010Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals