LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2016 >> Elantra Value Edition >> Repair and Diagnosis >> External Pages >> Different car >> Section 35 (Engine Control System) >> ETC (Electronic Throttle Control) System >> Repair Procedures >> Removal

Repair Procedures: Removal

WARNING: This page is about a different car, the 2016 Hyundai Elantra GT and 2015 Hyundai Elantra GT. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Remove the Resonator and the air intake hose (Refer to: "INTAKE & EXHAUST SYSTEM " in EM procedure).
  3. Disconnect the ETC module connector (A).
  4. Disconnect the coolant hoses (B).
  5. Remove the installation bolts (C), and then remove the ETC module from the engine.
Fig 1: Identifying ETC Module Connector And Coolant Hoses
G10749851Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals