LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2016 >> Elantra Value Edition >> Repair and Diagnosis >> External Pages >> Different car >> Section 35 (Engine Control System) >> Camshaft Position Sensor (CMPS) >> Repair Procedures >> Installation

Repair Procedures: Installation

WARNING: This page is about a different car, the 2016 Hyundai Elantra GT and 2015 Hyundai Elantra GT. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
  • Install the component with the specified torques.
  • Note that internal damage may occur when the component is dropped. If the component has been dropped, inspect before installing.
CAUTION:
  • Apply the Engine oil to the O-Ring.
CAUTION:
  • Insert the sensor in the installation hole and be careful not to damage.
CAUTION:
  • Be careful not to damage the sensor housing and the connector.
  • Be careful not to damage the O-Ring.
  1. Install in the reverse order of removal.

    Camshaft Position Sensor Installation Bolt: 

    9.8 ~ 11.8 N.m (1.0 ~ 1.2 kgf.m, 7.2 ~ 8.7 lb-ft)

scientia non olet · About LEMON Manuals