Repair procedures: Removal

Disconnect the battery (-) terminal (A) and then (+) terminal (B).

Fig 1: Disconnecting Battery (-) And (+) Terminals
Courtesy of HYUNDAI MOTOR AMERICA
Remove the air duct and air cleaner assembly.
(Refer to Engine Mechanical System - "ENGINE AND TRANSAXLE ASSEMBLY ")
Remove the battery mounting bracket (B) and the insulation pad (A), and then remove the battery (C).

Fig 2: Removing Battery Mounting Bracket And Insulation Pad
Courtesy of HYUNDAI MOTOR AMERICA
Disconnect the ECM connector (A), and then remove ECM (B) after removing the bolts/nut.

Fig 3: ECM Connector
Courtesy of HYUNDAI MOTOR AMERICA
Remove the battery tray (C) after removing the bolts.

Fig 4: Removing Battery Tray
Courtesy of HYUNDAI MOTOR AMERICA