LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2016 >> Elantra Sport, Standard Trans >> Repair and Diagnosis >> Transmission >> Transmission Control Systems >> Manual Transaxle Control System >> Shift Lever >> Repair procedures >> Removal

Repair procedures: Removal

CAUTION:
  • Place the shift lever in 4th shift position before removing it.
  1. Separate the boot and remove the knob (A) by rotating it counterclockwise.
    Fig 1: Knob
    G10537906Courtesy of HYUNDAI MOTOR AMERICA
  2. Remove the floor Interior console assembly.

    (Refer to "FLOOR CONSOLE ")

  3. Remove the air duct (A) by removing the nut.
    Fig 2: Air Duct Nut
    G10537907Courtesy of HYUNDAI MOTOR AMERICA
  4. Remove the bracket cover (A) by removing the nuts.
    Fig 3: Bracket Cover Nuts
    G10537908Courtesy of HYUNDAI MOTOR AMERICA
  5. Remove the select cable (B) by removing the snap pin (A).
    Fig 4: Select Cable And Snap Pin
    G10537909Courtesy of HYUNDAI MOTOR AMERICA
  6. Remove the shift lever assembly (A) by removing the bolts.
    Fig 5: Removing Shift Lever Assembly
    G10537910Courtesy of HYUNDAI MOTOR AMERICA
  7. Remove the shift cable (B) by removing shift cable clip (A).
    Fig 6: Shift Cable And Clip
    G10537911Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals