LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2016 >> Elantra Sport, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 15 (Brake System) >> Brake Booster >> Repair Procedures >> Installation

Repair Procedures: Installation

WARNING: This page is about a different car, the 2016 Hyundai Elantra GT and 2015 Hyundai Elantra GT. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install in the reverse order of removal.
    1. Before installing the pin, apply the grease to the joint pin.
    2. Use a new snap pin whenever installing.
  2. After installing, bleed the brake system.

    (Refer to: BRAKE SYSTEM BLEEDING ).

  3. After be equipped perform bleeding air procedure in clutch release cylinder after pouring the brake fluid. [MT only] (Refer to: Clutch - "CLUTCH RELEASE CYLINDER ").
scientia non olet · About LEMON Manuals